32
Components
1 Control panel
2 Air outlet
3 Air deflector (Left-Right)
4 Handle hole
5 Caster
6 Air filter
7 Air outlet (Heat exchange)
8 Air intake (Evaporator)
9 Air intake (Condenser)
10 Water outlet drain
11 Power supply cord
Safety Instructions
WARNING:
● Never use this appliance for anything other than its intended purpose.
Your air-conditioner is designed to be used in a house, office and similar
conditions and should not be used for any other purpose.
.
● If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
● Always keep the unit in an upright position to avoid damage to the cooling
system.
● Be sure that the air inlets and outlets are not blocked or covered.
● Don’t put any object into the air inlet or outlet of the unit.
● In order to avoid overheating, do not cover the unit while it is plugged in or
in-use.
● Never connect the unit to a defective socket.
● Never locate the appliance immediately below a socket-outlet.
● Never unplug the air conditioner while it is operating.
This could damage the electronic circuits.
● Leave at least 300mm space around the unit.
● To avoid tripping the circuit, do not use an extension cord for this unit.
● To turn on your unit, insert the plug into the socket and press the power
button.
● Do not bend or crush the warm air exhaust hose.
● Do not place the power cord under a carpet.
● This appliance is for ordinary indoor use. Never use the appliance in the
immediate
surroundings of a bath, a shower, a swimming pool or a
greenhouse.
● Keep the appliance in the vertical position during transportation. After
unpacking, place the unit upright to allow the refrigerant to stabilise, and wait
3 hours before use.
An
y dama
ge resulting from failure to comply with these instructions is
e
xcluded fr
om the warranty. Do not install and use your air
conditioner before completely reading these instructions.
m CAUTION: Dispose packaging material safely according to local
regulations
Power supply 220-240V/50Hz
Rated cooling capacity Kw 2.6
Rated input W 1200
Energy Efficiency Class C
Moisture removal l/h 1.6
Air circulation volume m
3
/h 320
Temperature Setting Range °C 16-32
Refrigerant/Charge
g
R407C
Body dimension WxHxD mm 435x790x400mm
Net weight
kg
30
Warranty: One Y
ear return to base
Specifications
AVAC9000CM[07]instructions 29/1/07 14:37 Page 2
To Next Page
Loading...
