ADE CK 2306 - Device Components; Start-up and Battery Installation

32
CK 2306 DCF radio-controlled alarm clock
7 Operating buttons
8 Hanging loop
9 Battery compartment, 2x LR/R6 (AA)
Start-up
The alarm clock is powered by two 1.5 V LR/R6 (AA)
batteries.
1. Push the locking tab down and remove the
battery compartment cover.
2. Insert the batteries as shown on the bottom of
the battery compartment. Pay attention to the
correct polarity (+/-).
3. Replace the battery compartment cover.
The locking tab must audibly engage.
7 98