41
CK 2306 DCF radio-controlled alarm clock
English
Battery change indicator
When appears on the display, you need
to change the batteries. Follow the procedure
described in section “Start-up”.
Resetting the radio-controlled alarm
clock to factory setting
Reset the radio-controlled alarm clock to its
factory setting if the display shows unusual or
obviously incorrect values.
1. Remove the batteries from the battery
compartment and wait a while.
2. Reinsert the batteries. Observe the correct
polarity (+/-).
3. Follow the procedure described in chapter
“Receiving the time signal”.
Cleaning
− If necessary, dust the item with a soft, dry
cloth or wipe it with a slightly moistened
cloth.
To Next Page
Loading...
