1
CAUTION
1 To adjust and maintain after stopping the machine and take the plug off the socket.
2 Fix the milling hood when carriage, surface planing, press planing, sawing and storage (see
below Fig).
3 To mount the protective device during the milling operation.
4 To dismount sawblade if you have to operate the press planing, milling and drill for a long
time.
5 Max. diameter of milling cutter is less than 104mm.
6 Let the milling feeding presser (used as anti-kickback jaw) and the outfeed presser press the
workpiece dependably. The adjusted natural height should be lower than that of the level of
milling cutter.
milling hood
To Next Page
Loading...