This document describes a solar-powered LED floodlight with motion sensor and remote control, designed for outdoor use. The device is part of the "Twice" series, with the model reference OS-A51. It boasts a 3-year guarantee and is repairable.
Function Description:
The device is a solar-powered LED floodlight intended for outdoor illumination. It features a separate solar panel that charges a built-in Li-ion battery during the day, and an LED light unit that provides illumination at night. The floodlight includes a motion sensor for automatic activation and can be controlled via a remote. It offers various lighting modes, including continuous illumination and motion-activated lighting with adjustable brightness and duration.
Important Technical Specifications:
- Battery: 3.7V, 3600mAh Li-ion battery.
- Ingress Protection (IP) Rating: IP65, indicating it is dust-tight and protected against water jets from any direction, making it suitable for outdoor environments.
- Motion Sensor Detection Angle: 120°.
- Motion Sensor Detection Range: Up to 7 meters.
- Installation Height: Recommended between 2 and 4 meters.
- Light Unit Adjustment: The LED light unit can be rotated 360° horizontally.
- Solar Panel Adjustment: The solar panel can be rotated 270° vertically.
- Remote Control Battery: Requires AAA dry batteries (not included).
Usage Features:
Installation (Montage):
The installation process involves mounting the LED light unit and the solar panel separately.
- Mounting the LED Light Unit (Steps 1 & 2):
- Mark two drilling points 75mm apart on the desired surface.
- Drill holes with an 8mm diameter.
- Insert the provided wall plugs (D) into the drilled holes.
- Secure the mounting bracket of the LED light unit using screws (C) and washers (B).
- Attach the LED light unit to the bracket.
- The LED light unit can be adjusted 360° horizontally to direct the light as needed.
- Mounting the Solar Panel (Steps 3 & 4):
- Mark two drilling points 83.5mm apart on the desired surface.
- Drill holes with an 8mm diameter.
- Insert the provided wall plugs (D) into the drilled holes.
- Secure the mounting bracket of the solar panel using screws (C) and washers (B).
- Attach the solar panel to the bracket.
- The solar panel can be adjusted 270° vertically to optimize sun exposure for charging.
- Connecting the Solar Panel to the LED Light Unit (Step 5):
- Connect the cable from the solar panel to the input port on the LED light unit. Ensure a secure connection.
- It is crucial to install the solar panel in a location that receives ample direct sunlight for efficient charging. Poor sunlight exposure will result in reduced battery performance and shorter illumination times.
Operation (Utilisation):
The floodlight is controlled via a remote control.
Basic On/Off and Mode Selection (Step 1):
- Power On/Off: Press the "ON" or "OFF" button on the remote control.
- Manual Mode (Continuous Illumination):
- Press the "ON" button on the remote.
- The light will turn on.
- To turn off, press the "OFF" button.
- Sensor Mode (Motion-Activated):
- Press the "TJ" button on the remote. This activates the motion sensor.
- The light will turn on automatically when motion is detected in the dark and turn off after a set delay if no further motion is detected.
- The remote control must be pointed towards the light unit for commands to be registered. A single press (1s) is typically sufficient.
Brightness Adjustment (Step 2):
- In continuous illumination mode (after pressing "ON"), the brightness can be adjusted.
- The remote offers several brightness levels: 15%, 30%, 45%, and 60%.
- Pressing the "+" or "-" buttons (or specific brightness percentage buttons if available) on the remote will cycle through or select these levels.
- There is also a "30%" and "60%" button, likely for quick selection of these common brightness levels.
Timer and Auto Modes (Step 3):
- AUTO Mode:
- Press the "AUTO" button on the remote.
- In this mode, the light will automatically turn on at 100% brightness when motion is detected in the dark and dim to 5% brightness after 1 minute of no motion. This provides continuous low-level ambient light with full brightness upon detection.
- Timed Modes (3H, 5H, 8H):
- These buttons activate a timer for continuous illumination at a selected brightness level.
- 3H Mode: Press the "3H" button. The light will stay on for 3 hours. During this period, the brightness can be set to 15%, 30%, 45%, or 60%. After 3 hours, the light will switch to motion-activated mode, turning on at 30% brightness when motion is detected and dimming to 5% after no motion.
- 5H Mode: Press the "5H" button. The light will stay on for 5 hours. During this period, the brightness can be set to 15%, 30%, 45%, or 60%. After 5 hours, the light will switch to motion-activated mode, turning on at 30% brightness when motion is detected and dimming to 5% after no motion.
- 8H Mode: Press the "8H" button. The light will stay on for 8 hours. During this period, the brightness can be set to 15%, 30%, 45%, or 60%. After 8 hours, the light will switch to motion-activated mode, turning on at 30% brightness when motion is detected and dimming to 5% after no motion.
- The timer countdown is indicated by a "00:00:00" icon, suggesting a visual timer or countdown feature.
Maintenance Features:
- Repairable: The product is explicitly labeled as "REPAIRABLE," indicating that components can be replaced or fixed, extending the product's lifespan and reducing waste. This aligns with a commitment to sustainability.
- Recycling: The product is designed to be recyclable. Users are encouraged to dispose of the product responsibly at designated recycling centers. This includes components like the battery and electronic parts.
- Battery Replacement: While not explicitly detailed, the repairable nature suggests that the Li-ion battery can be replaced if its capacity diminishes over time.
- Cleaning: Regular cleaning of the solar panel is recommended to ensure optimal charging efficiency. Dust, dirt, and debris can reduce the amount of sunlight reaching the panel.
- Inspection: Periodically inspect the connections and mounting hardware to ensure they remain secure, especially in outdoor environments exposed to weather.
Environmental Considerations:
- Solar Power: Utilizes renewable solar energy, reducing reliance on grid electricity and lowering carbon footprint.
- Recyclability: Emphasizes the importance of recycling the product at the end of its life to minimize environmental impact.
This comprehensive description covers the key aspects of the solar-powered LED floodlight, from its technical specifications and installation to its various operational modes and maintenance considerations.
To Next Page
Need help?
General
