EasyManua.ls Logo

Adesys Octalarm-IP User Manual

Adesys Octalarm-IP
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Octalarm-IP alarm dialer
Pincodes
The Octalarm-IP is given the following two
pincodes in the factory:
Administrator: 1111
Installer: 9999
Replace these with codes of your own
choice during installation or turn off the
use of pincodes in option menu General.

Table of Contents

Other manuals for Adesys Octalarm-IP

Question and Answer IconNeed help?

Do you have a question about the Adesys Octalarm-IP and is the answer not in the manual?

Adesys Octalarm-IP Specifications

General IconGeneral
BrandAdesys
ModelOctalarm-IP
CategorySecurity System
LanguageEnglish

Summary

General Information

Alarm Reporting Safety Rules

Outlines essential guidelines for ensuring safe and reliable alarm reporting procedures.

Concepts and Terms

Personal Pincodes and User Roles

Explains the security system using PINs and different user access levels.

Front Panel Overview

Front Panel Controls

Describes the function of buttons, keys, and navigations on the device's front interface.

Loudspeaker and Indicators

Explains the audio output and visual status lights on the front panel.

Programming the Octalarm-IP

Programming Methods and Preferences

Outlines different ways to set up the device and save configurations.

Quick Start Mode Setup

Provides a simplified procedure for rapid initial device configuration.

Complete Setup Procedure

Step 3: Telephone Book Entry

Instructions for adding and managing contact details for alarm recipients.

Alarm Configuration Steps

Step 4: Call List Compilation

Explains how to create sequences for calling alarm recipients.

Advanced Configuration and Reporting

Application Example

Testing and Remote Control

Alarm Activation and Resetting

Describes how alarms are triggered, reported, and reset.

Internet Connectivity

Logging In via the Internet

Instructions for accessing and managing the device remotely through a web browser.

Upgrade Procedure via ACC

Steps for updating the device's software using the Adesys Control Centre.

Installation and Mounting

Connecting Inputs and Outputs

Details on wiring external sensors and alarm devices to the unit.

Advanced Connections and Power

Connecting Ethernet and Internet

How to set up network connectivity for data transfer and remote access.

GSM Module Installation

Steps for installing and configuring the optional GSM communication module.

System Management and Power

Mains Failure and Battery Management

How the system handles power outages and monitors battery status.

Error Handling and Data Logging