1. General information
1.1 Information about the instruction manual
This instruction manual contains information about the installation, operation
and maintenance of the appliance and should be consulted as an important
source of information and reference guide. Awareness of the safety
instructions and instructions for use in this manual will ensure the safe and
correct use of the appliance.
In addition to the information given here, you should comply with any local
Health and Safety Controls and generally applicable safety regulations. The
instruction manual forms part of the product and should be kept near the
appliance and easily accessible for anyone carrying out the installation,
servicing, and maintenance or cleaning.
1.2 Other regulations
In addition to the information given here, you should comply with any local
Health and Safety Controls and generally applicable safety regulations. The
instruction manual forms part of the product and should be kept near the
appliance and easily accessible for anyone carrying out the installation,
servicing, and maintenance or cleaning.
1.3 Note
NOTE! Read the instruction manual carefully before using the appliance. The
user’s manual should be kept near the appliance, easily accessible for anyone
to operate the unit. We reserve the right to make technical changes for
purposes of developing and improving the useful properties.
2. Safety
This section provides an overview of all important safety aspects.
Attention should be paid to all symbols, markers and labels on the device,
which must be kept in a permanent state of legibility. By following all the
important safety advice you gain an optimal protection against all hazards as
well as the assurance of a safe and trouble-free operation.
2.1 General Information
This device is designed in accordance with the presently applicable
technological standards. However, the device can pose a danger if handled or
operated improperly and inappropriately. Knowing the contents of the user’s
manual as well as avoiding mistakes and thus operating this device safely and
in a fault-free manner is very essential to protect yourselves from the hazards.
To prevent hazards and to ensure optimum efficiency, no modifications or
alterations to the device that are not explicitly approved by the manufacturer