28 C-21 BIKE
WWW.ADIDASHARDWARE.COM 29
EN
14
7
6
13
5
1
4
15
11
12
8
3
2
16
9
17
10
1. LEVEL/SPEED DISPLAY
2. STOP/TIME/WATT DISPLAY
3. CALORIE DISPLAY
4. PULSE DISPLAY
5. TIME DISPLAY
6. SPEED DISPLAY
7. RESET
Press to reset all values,
and hold to restart.
8. RECOVERY
Test heart rate recovery; Once
complete, press again to revert.
9. DOWN (-)
Adjust function value down.
10. ENTER
Confirm value of each function.
11. DISTANCE DISPLAY
12. USER PROFILE DISPLAY
13. RPM DISPLAY
Revolutions per minute.
14. PAUSE/STOP
Press this button to either pause
or stop the machine.
15. START
Will commence program.
16. UP (+)
Adjust function value up.
17. MODE
Select or switch values of each
function. Can be as confirmation.
USER PROFILES (U1–U4)
The console will power on with a long beep, the wheel diameter
78 will be displayed, and then the console will display U1.
• Use (+)/(-) to change between user profile U1, U2, U3
and U4, press MODE to confirm your selection
• Set your gender (male is the default) using (+)/(-),
and then press MODE to confirm
• Set your age (25 years is the default) using (+)/(-),
and then press MODE to confirm
• Set your height (160cm is the default) using (+)/(-),
and then press MODE to confirm
• Set your weight (50kg is the default) using (+)/(-),
and then press MODE to confirm
• Finally, press MODE again into main menu
• Press (+)/(-) to select exercise mode, and press START
to work out; Hold RESET (
) to restart, and revert to
user interface
CONSOLE COMPUTER PROGRAMS
To Next Page
Loading...
