MOUNTING THE T-BAR
The stand comes with a T-Bar for mounting optional lighting and other equipment. To install the T-Bar,
vertically align the Support Bars with the T-Bar connection. Lower the T-Bar onto the inner pipe and
tighten Knob A to secure T-Bar to stand.
MOUNTING OPTIONAL LIGHTING AND OTHER ACCESSORIES
Lighting and other optional accessories may be mounted to the T-Bar. For installation instructions,
please refer to the mounting instructions provided with the unit that is to be installed.
Note: The stand has a maximum capacity of 132.3 lbs. (60 kg)
:
To Next Page
Loading...
