Powering Up
Follow these steps to turn on your Writer.
1. Lift the keyboard so you can see the underside. Figure 1
2. Locate the on/off switch, and slide it to the ‘on’ position. Figure 2
3. Put the keyboard down again so you can see the top.
4. Press and hold the pairing button on the top right of the keyboard, for
four seconds (count to 4). Figure 4
5. The indicator LED should show a green blinking light; your Writer has
enough power to function.
6. If the indicator LED blinks showing a red light, you need to recharge your
Writer using the USB port.
support@adonit.net | 6
To Next Page
Loading...