Revision B
ADP QuickPunch
®
Plus Finger Scan Device
Installation Guide for the ADP InTouch
Overview
The ADP QuickPunch Plus finger scan device enables your organization to require biometric verification or identification
when employees use the InTouch. The system administrator configures the biometrics settings on the host system and the
manager uses the biometrics features on the InTouch to enroll employees in the system.
Parts
Before you begin
• If you are installing the InTouch and the power is already off, skip to Step 1.
• If the InTouch is assembled and running:
a. Use the security wrench to remove the cover.
b. Disconnect the power and the optional backup battery.
For more information, see the InTouch installation guide.
To Next Page
Need help?
General