Adrenaline Amusements Spinner Frenzy SF-50-1001 User Manual

Adrenaline Amusements Spinner Frenzy SF-50-1001

61 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Spinner Frenzy

SF-50-1001

Operation & Service Manual

Version 1.0

* Read this manual before use

Table of Contents

Questions and Answers:

C
claudiaalvarezAug 1, 2025
What to do if there is no picture on my Adrenaline Amusements Toy?
- J
  John GonzalezAug 1, 2025
  If your Adrenaline Amusements Toy displays no picture, start by checking the connections. Ensure the VGA video cable is properly connected to the VGA Splitter, as loose or faulty connections between the monitor and the VGA Splitter could be the cause. Also, verify that the VGA video cable is properly connected between the VGA splitter and the NUC computer. If only one monitor lacks a signal, make sure its VGA cable is securely connected. Check that the NUC Computer is powered on, and if there's no LED, press the Power Button to start the computer. If the issue persists, you may need to disassemble the front cabinet.
C
Christopher BradleyAug 15, 2025
How to fix low volume on Adrenaline Amusements Spinner Frenzy SF-50-1001?
- U
  uriveraAug 15, 2025
  To address low volume or no sound on your Adrenaline Amusements Toy, first, increase the volume in the game via the Operator Menu, accessible by pressing the Operator Button. You can also quit to the Windows desktop and adjust the volume using the Speaker icon in the bottom right corner. Verify the wiring behind the speakers and in the amplifier. Lastly, ensure the 1/8’’ audio jack is plugged into the computer’s sound input jack and that the other end RCA’s are plugged into the sound amplifier.

Adrenaline Amusements Spinner Frenzy SF-50-1001 Specifications

General

Brand	Adrenaline Amusements
Model	Spinner Frenzy SF-50-1001
Category	Toy
Language	English

Summary

Chapter 01 - Preface

Safety

Safety instructions for operation and service personnel.

Chapter 04 – Unit Installation

Assembling your Spinner Frenzy Unit

Step-by-step instructions for assembling the game unit.

Chapter 05 - Operator Menu

Operator Menu

How to access and navigate the operator menu settings.

Ticket Payouts Structures

Chapter 06 - Service & Repair

Computer Connections

Troubleshooting

Provides guidance for diagnosing and resolving common video and audio issues.

Monitor Replacement

Front Kickboard Assembly RGB LED replacement

Wireless Internet Configuration

Chapter 08 – Diagrams & Schematics

I/0 Board ADR-04-1001

Detailed diagram and pinout for the I/O board.

I/O Board - Spinner Sensors Wiring

Schematic showing the wiring for spinner sensors and solenoid.

I/O Board - Coins & Ticket Wiring

Wiring diagrams for coin validator, meter, and ticket dispenser.

Power Distribution Schematics

Diagram showing the power distribution throughout the unit.

RGB LED Wiring (Global View)

Chapter 09 – Software Recovery

Software Recovery

Instructions for restoring the unit's software.

Limited Warranty Policies