Connecting your USB Instant DVD for
Audio/Video Capture
Video Source
(VCR, DVD player,
Camcorder, etc...)
Power
source
(optional) Walk up
connectors for easily
connecting any
video source for
video capture
L/R Audio Out
USBPort
Line In
Your Computer’s
soundcard (Refer
to the USBInstant
DVDmanual for
more detailed
instructions)
Video Out
Follow these directions when
using USB Instant DVD for
the first time
Instructions for initial installation
1) Insert the USB Instant DVD
CD
2) Connect the USB Instant
DVD unit to your computer
3) Follow the on screen
instructions to install the
new hardware
4) Install the software after the
hardware has been
successfully installed
Back of your computer
E
F
Cables
D
D
B
C
E
USB Instant DVD
Quick Installation Guide
This Quick Installation Guide should be
used as a reference guide only. It is highly
recommended that you read the complete
USB Instant DVD Manual before using this
product to help ensure you get the most out
of your USB Instant DVD!
G
D
B
C
To Next Page
Need help?
General
