Need help?Do you have a question about the ADS 642CSi and is the answer not in the manual?
Illustrates a two-channel system configuration for the 642CSi.
Guidance on how to use the manual.
Overview of the 642CSi's functions and benefits.
Explains connection points for power, ground, and remote turn-on.
Details low-level phono and high-level speaker input terminals.
Describes the multi-function output connector for amplifiers.
Specifies the connection for the optional remote bass control.
Adjustments for mixing low-pass bass signal into channels.
Balancing input signals and system fader settings.
Selects mono or stereo for subwoofer signals.
Precautions against damaging vehicle components during installation.
Guidance on secure mounting and protection from environment.
Emphasizes battery disconnection for power connections.
Covers fuse replacement and the necessity of the remote bass control jumper.
Advises on safe sequence for powering up components.
Lists complementary a/d/s/ amplifiers and speakers.
Guidance on wire types, lengths, and signal source connections.
Importance of matching channels for correct audio balance.
Configuration for a two-channel system with equalization.
Setup for front/rear speakers with constant bass.
Configuration for front/rear speakers and subwoofers.
How to connect and use two different head units simultaneously.
Setting the maximum distortion-free head unit output level.
Optimizing subwoofer amplifier input levels for distortion-free output.
Adjusting amplifier input levels for front and rear channels.
Adjusting constant bass levels for full-range systems.
Setting constant bass levels for systems including subwoofers.
Fine-tuning low-pass signal for balanced sound.
Steps to resolve issues where no bass is produced.
Routine checks for connections and system integrity.
Details output channels, impedance, and input sensitivity.
Lists crossover frequencies and adjustment ranges.
Wiring diagram for a four-channel setup.
Pin assignment for the 8-pin DIN output connector.
Physical size and weight of the 642CSi.
Details available accessories for expanding system functionality.
Wiring diagram for a six-channel setup with subwoofers.
To Next Page
General