Need help?Do you have a question about the adstec OPC7000 Series and is the answer not in the manual?
General| Brand | adstec |
|---|---|
| Model | OPC7000 Series |
| Category | Industrial PC |
| Language | English |
Explains the purpose and accessibility of the instruction manual for safe device handling.
Outlines ADS-TEC's liability concerning device use, modifications, and unauthorized repairs.
Identifies ADS-TEC Industrial IT GmbH as the manufacturer of the product.
Lists other crucial documents and resources for device setup, operation, and technical data.
Explains the format of safety instructions, including signal words, hazard types, and prevention measures.
Describes how signal words (DANGER, WARNING, CAUTION) classify the hazard level and potential consequences.
Defines key hazard symbols such as DANGER, WARNING, CAUTION, and ATTENTION for user safety.
Details symbols for battery disposal regulations and the protective earth connection.
States that data and figures are illustrative and subject to change without notice.
Mentions product trademarks and copyright protection for the manual content.
Specifies allowed operating and storage temperatures, humidity, and vibration limits for device longevity.
Declares CE marking compliance with relevant EU directives and provides links for conformity documents.
Lists the standard components included in the device packaging and optional items.
Highlights key features like multi-touch operation, wide-screen format, and component replacement accessibility.
Covers manual accessibility, qualified personnel, safety observations, and device cleaning procedures.
Specifies requirements for installation environments, prohibiting use in non-specified or hazardous locations.
Instructs to shut down and secure the device immediately if signs of improper use or damage are evident.
States that all repairs during the warranty period must be performed by the manufacturer or authorized service personnel.
Defines the Panel PC's purpose for machine control/monitoring in electrical panels and cabinets.
Details operations considered improper, including vehicle control or hazardous applications, and disclaims liability.
Provides warnings regarding battery explosion risks and instructions for proper disposal according to regulations.
Warns about potential damage from electrostatically sensitive components and mandates safe working conditions.
Details requirements for rear accessibility, wall thickness, and recommendations for IP65 front sealing.
Illustrates external dimensions and shows front, side, and rear views of the OPC7008 model.
Provides precise dimensions for the mounting cutout required for the OPC7008 model.
Illustrates external dimensions and shows front, side, and rear views of the OPC7013 model.
Provides precise dimensions for the mounting cutout required for the OPC7013 model.
Illustrates external dimensions and shows front, side, and rear views of the OPC7015 model.
Provides precise dimensions for the mounting cutout required for the OPC7015 model.
Illustrates external dimensions and shows front, side, and rear views of the OPC7022 model.
Provides precise dimensions for the mounting cutout required for the OPC7022 model.
Warns about incorrect use of grub screws on the Quick Snap element, potentially damaging the device.
Details the steps for installing the OPC7008, including loosening tensioners and applying specific torque.
Explains the installation process for OPC7013-7022 models, covering cut-out and securing the device.
Emphasizes powering off the device before connecting/disconnecting cables and acclimatizing to ambient temperature.
Lists and describes the specific interfaces (On/Off, Power, COM, LAN, USB) available on the OPC7008 model.
Details the interfaces for OPC7013-7022 models, presenting two variants with different port configurations.
Notes the location of device interfaces and power supply plug, and outlines cable connection steps.
Outlines the sequence for connecting power, serial/parallel data, and other required cables during commissioning.
Instructs to check for hidden damages from transport or misuse, and to shut down if found.
Explains the basic functions of front panel keys like ABC, Num, >>, and Fn for device control.
Describes the soft keyboard's installation and use for data entry via the touch screen.
Confirms the touch screen is USB-connected, with integrated driver software for operation.
Explains the SYS LED meanings for device status, including power, operation readiness, and brightness limits.
Details the 24V DC power supply connection via a lead-through terminal and its technical specifications.
Describes pinouts and standards for both USB 2.0 and USB 3.0 interfaces on the device.
Provides pinouts for 10/100Mbit and 1000 BaseT Ethernet network connections via RJ45 ports.
Details the pinout for the RS232 serial interface and notes its non-isolated nature.
Lists available internal storage media: 2.5" HDD SATA, 2.5" SSD SATA, and mSATA SSD.
Explains connecting external storage via USB and warns about potential data loss during hot-plugging.
Details OS installation via USB, BIOS settings, and driver setup for touch screen and soft keyboard.
Introduces ADS-TEC's software modules for device configuration and where to find further documentation.
Provides contact details (phone, fax, email) and availability hours for direct customer support.
Lists the company address, general contact phone, email, and website for inquiries and information.
Instructs on removing screws to open the service slot on the rear of the OPC7008 device.
Details opening the service slot on OPC7013-7022 models by removing screws with a Tx10 screwdriver.
Guides on replacing the lithium battery, including loosening the bracket, removal, and polarity warnings.
Describes the removal and installation process for the hard disk drive (HDD) on OPC7013-7022 models.
Details the removal and installation of the fan, including unplugging its cable before replacement.
Explains how to release and replace RAM modules by pulling apart retaining clips until they engage.
Provides instructions on removing the HDD to access and replace mSATA modules in OPC7000 series devices.
To Next Page