ADT Door and Window Detector - Page 3

Take the ADT Door and Window Detector to where
you intend to mount it after setup.
2. Use the SmartThings app on your smartphone
to select the “My Home” tab. Select "Things", and
then “Add a Thing".
Setup
Setup
• Make sure you are within 350 feet from the
ADT Security Hub. (Exact range depends on
your home’s construction, the environment, the
position of the ADT Security Hub, and the position
and number of other connected devices.)
• Make sure that your ADT Security Hub is disarmed
before connecting a new device.
• Make sure that you only setup one new device
at a time.
Use the SmartThings app to scan the QR code on the
back of the detector and then follow the on-screen
instructions to complete setup.
3.
Detector (Back)
QR Code
• Do not remove the battery tab until you are ready
to set up the detector.