The user will then need to map the entry into the associated PMT by visiting the Manual PID
Mapping tab. The Italian DVB Subtitle PID was entered into the first manual PID configuration.
This can be mapped by moving the associated PID from the ‘Unmapped PIDs’ box into the
‘Mapped PIDs’ box.
For dual encoder products, the Service 1 heading refers to the first logical encoder. The PMT
Index selection refers to the first or second program being generated by the logical encoder. In
most applications, this should always be 1.
Once configured, the encoder will have a new PMT with an additional DVB-Subtitle subtitle
entry. It will be described as stream type 6 with an Italian language descriptor and referencing
PID 135. It is up to the user to verify accuracy of all information entered.
To aid in user configuration a few common stream types are below.
To Next Page
Loading...
