SNMP in the NetVanta 1570 Configuring SNMP Using the GUI
6AMCCG0018-29A 19
SNMP v3
This example configures the ASE device for SNMPv3 with user-defined security users, snmp users, groups,
and views.
The following commands, entered from global configuration mode, enable SNMPv3 on the NetVanta 1570:
snmp-server community communityname ip-range 0.0.0.0 0.0.0.0
snmp-server user snmpusernamero engine-id engineid
8000029803xxxxxxxxxxxx md5
password priv des privpassword
snmp-server user snmpusernamerw engine-id engineid 8000029803xxxxxxxxxxxx md5
password priv des privpassword
snmp-server security-to-group model v3 name snmpusernamero group rogroupname
snmp-server security-to-group model v3 name snmpusernamerw group rwgroupname
snmp-server view v3viewname .1 include
snmp-server access rogroupname model v3 level priv read v3viewname
snmp-server access rwgroupname model v3 level priv read v3viewname write
v3viewname
snmp-server contact yourname
snmp-server contact phone yourphone
snmp-server contact email youremail
snmp-server chassis-id yourchassisid
do write
7. Configuring SNMP Using the GUI
Configuration of SNMP in the NetVanta 1570 consists of retrieving the ASE MIBs needed for the network and
enabling and configuring the device to be polled by a NMS. The NetVanta 1570 can be configured using SNMP
v1/v2c or SNMP v3 security.
Retrieve the ASE Product-Specific MIBs
Before you begin configuration, download the MIBs you wish to install on your NMS. To retrieve the ASE MIBs,
visit Adtran’s website at the following link:
https://supportcommunity.adtran.com/t5/General-MIBs/bd-p/sw-general-mibs
and select NetVanta 1570
(ASE). This will initiate a download of a zip file containing the ASE MIBs.
After downloading the MIBS, connect to the ASE GUI and begin configuring SNMP in the ASE device as
outlined in the following sections:
● Configuring SNMP v1/v2 in the GUI on page 20
● Configuring SNMP v3 in the GUI on page 20
● Optional Settings in the GUI for SNMP v1/v2 and v3 on page 24
NOTE
g
By default, SNMP is disabled on all ASE switches for security purposes. Adtran recommends
configuring the ASE device with SNMP v3 security, if possible.
To Next Page
Loading...
Need help?
General
