2.5 Dismounting the backplate
1. Dismount the two screws placed in the middle
of the backplate
2. Lift up the flanges placed on the right hand
side of the backplate
3. Twist the backplate. The backplate can now
be released in the opposite side.
3.0 Lighting a fire in the wood burning stove
3.1 Important safety information
The wood burning stove will become
warm during use and therefore it should
be treated with all necessary caution.
Never keep easily combustible fluids
such as petrol in the vicinity of the wood burning stove – and never use easily combustible fluids to light the
fire in the wood burning stove.
Never empty the ash drawer when the wood burning stove is warm. Embers may still be found in the ash
drawer for up to 24 hours after the fire has gone out. Please wait to empty the ash drawer until you are
sure that there are no embers in the ash.
The door should be kept closed while the wood burning stove is in use. While lighting the fire, the door can
stand ajar for the first few minutes.
In the event of a chimney fire: Close all the dampers on the wood burning stove and call the fire-fighting
service.
3.2 Recommended fuels?
Wood and woodbriquettes. We recommend the use of split hardwood that has been stored outdoors under
cover for at least 1 year. Wood that has been stored indoors has a tendency to become too dry and will burn
too quickly. The wood should preferably be felled in the winter, when a lot of the moisture in the wood will have
been drawn down into the roots. In order to achieve optimum combustion, the wood’s moisture level should not
To Next Page
Loading...
