Need help?Do you have a question about the Advance acoustic MAV-501 and is the answer not in the manual?
General| Brand | Advance acoustic |
|---|---|
| Model | MAV-501 |
| Category | Home Theater System |
| Language | English |
Introduction to the MAV-501 Home Cinema system, its components, and features.
Warnings against opening the unit to prevent electric shock and refer servicing to qualified personnel.
Explains the meaning of important information symbols like exclamation marks and lightning flashes.
Recommendations for packing and moving the appliance to prevent damage during transportation.
Covers reading, retaining, heeding warnings, following instructions, and water/moisture avoidance.
Details ventilation, heat avoidance, power source connection, grounding, and power line proximity.
Includes power cord protection, cleaning, preventing object/liquid entry, and non-use periods.
Outlines conditions requiring service and proper servicing procedures for the appliance.
Explains the automatic audio signal detection for switching the subwoofer on and off.
Describes the function of the LED indicator for power status.
Details the volume knob for adjusting the subwoofer's sound level.
Explains how to adjust the phase setting (0° or 180°) for optimal bass coherence.
Guides setting the crossover frequency (50-150Hz) for the subwoofer's bass output.
Describes connecting the subwoofer using RCA stereo inputs or a single input from a home cinema receiver.
Explains connecting speakers and amplifiers using high-level inputs and outputs.
Provides three essential steps for optimizing bass level, phase, and crossover frequency.
Illustrates recommended placement for front, rear, and center speakers and the subwoofer.
Details power, driver size, frequency response, and other technical specs for the subwoofer.
Lists power, sensitivity, impedance, and driver details for the center channel speaker.
Provides power, sensitivity, impedance, and driver details for the satellite speakers.
Discusses potential interference from other electrical devices and magnetic fields.
Warns against water exposure and requires disconnection before servicing.
Specifies Class 1 construction requirements for earthing connection to mains sockets.
To Next Page