OPERATION AND CONTROL
There is one glove box on each side of instrument
panel, which can be used for storage. When the
glove box cover is not locked, press the lock head
to open the cover.
Unlock: Insert the key into the lock, rotate in the
clockwise direction to unlock, and then remove
the key.
Locking: Close the box cover, insert the key and
rotate in the counterclockwise direction to lock,
and then remove the key.
Combination Switch
1. Turn signal: Move the turn signal lever forward,
left turn signal flashes. At the same time, you'll
be able to see a flashing arrow directed to the
left on your instrument cluster. Move the turn
signal lever backward, the arrow directed to
the right on.
2. Low beam: Front part of the lever can be
pushed and pulled. After the vehicle is started,
push the lever forward to turn on low bean and
backward to turn off.
3. High beam: move the lever upwards (steering
wheel surface) to turn on high beam.
Releasing the lever, it will automatically return
to original position, and the high beam can be
permanently on.
4. Horn: Press lightly on the end of lever, where
horn button is located.
14
To Next Page
Loading...
