Customer Service 1-888-707-1880
Or customerservice@pincoffs.ca 8 Maurice Pincoffs Canada Inc.©2013
Step 3
Attach rear stabilizer (2) to back of the slide rail (8). Secure using four allen screws (63) and four
washers (45). Note: the rear stabilizer needs to tilt towards the front of the rower.
Step 4
Attach the left pedal (13) to the left bracket of the pedal support tube (7). Slide the axle (36) through
the left pedal (13). Secure using two allen bolts (21) and two washers (22).
Repeat the same procedure for right pedal (14).
To Next Page