D-18 ADAM-5510/P31
Performance
When ID12 is true, the communication is successful.
The coil DO flash ON and OFF in each scan.
The memory for the 1st rung occupies 41300 bytes.
Use an oscillator to detect the scanning time between each pulse.
D.2.2 Memory Performance
Memory performance can be judged by the memory left after compiling
a ADAM-5510/P31 Remote I/O Function Block executable. Its purpose
is to let users know how much memory is still available for the purpose
of managing the whole system. The ADAM-5510/P31 is equipped with
128 K bytes memory space for executing your application program. If
the memory requirement for the application surpasses the memory still
available, the program is unable to execute. The testing results are the
following.
Block: The number of Function Blocks.
Block 0: There is no function block but signal input and signal output
only.
Block 3: There are three function blocks.
Scan (ms) : The time for executing function blocks
Memory byte: The memory left after the function block being
compiled.
Mem. Increas: The memory increases after adding an additional
function block.
D.2.2.1 ADAM-4011/4011D
Table D-13: ADAM-4011/4011D Function Block Response Time
Block Scan (ms) Memory byte Mem. increas
0 1.33 41300
1 5.6 58158 16858
2 13.4 58238 80
3 19.7 58814 576
4 26.1 58894 80
Average 5.66
To Next Page
Loading...