6-4-2 I/O Module Command Set Searching Tables
ADAM-6017 Command Table
Command
Syntax Command Name Description
$aaAff Set Integration Time Sets the integration time for a
specified module
$aaB Get Integration Time Get the integration time from a
specified module
$aaAnntt Set Input Range Set the input range to the specified
channel in the analog input module
$aaBnn Read Input Range Read the input range of the specified
channel in the analog input module
#aan Read Analog Input
from Channel N
Return the input value from the
specified channel in the analog input
module
#aa Read Analog Input
from all channels
Return the input values from all
channels of the specified analog
input module
$aa0 Span Calibration Calibrate the analog input module to
correct the gain error
$aa1 Offset Calibration Calibrate the analog input module to
correct the offset error
$aa6 Read Channels Status Asks a specified input module to
return the status of all channels
$aa5mm Enable/Disable
multiplexing
Enables/Disables multiplexing
simultaneously for separate channels
of the specified input module
To Next Page
Loading...
