MANAGING SWITCH
135
4.10.4 System Log
Logging Service
The Logging Service page allows you to setup the logging services feature for the system
log.
To access this page, click Diagnostics > System Log > Logging Service.
Figure 4-107. Diagnostics > System Log > Logging Service
Size (in bytes) Enter the size of ping packet. The default value is 56. The value ranges
from 8 to 5120. The size you enter is not retained across a power cycle.
Ping Results Display the reply format of ping.
PING 2222::777 (2222::777): 56 data bytes
--- 2222::777 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Or
PING 2222::717 (2222::717): 56 data bytes
64 bytes from 2222::717: icmp6_seq=0 ttl=128 time=10.0 ms
64 bytes from 2222::717: icmp6_seq=1 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=2 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=3 ttl=128 time=0.0 ms
--- 2222::717 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.0/2.5/10.0 ms
Apply Click Apply to display ping result for the IP address.
Table 4-104. Diagnostics > IPv6 Ping Test (Continued)
Item Description
To Next Page
Loading...