Advantech EKI-7428G Series - Port Monitoring

MANAGING SWITCH
32
The ensuing table for Logging Information table settings are informational only: Target,
Severity and Category.
The ensuing table for Logging Message table settings are informational only: No., Time
Stamp, Category, Severity and Message.
4.3.3 Port Monitoring
Port Network Monitor is a bandwidth and network monitoring tool for the purpose of
capturing network traffic and measuring of network throughput. The monitoring functionality
includes listing of port statistics as well as port utilization.
Port Statistics
To access this page, click Monitoring > Port Monitoring > Port Statistics.
Figure 4-5. Monitoring > Port Monitoring > Port Statistics
The following table describes the items in the previous figure.
The ensuing table for IF MIB Counters settings are informational only: ifInOctets, ifInUcast-
Pkts, ifInNUcastPkts, ifInDiscards, ifOutOctets, ifOutUcastPkts, ifOutNUcastPkts, ifOutDis-
cards, ifInMulticastPkts, ifInBroadcastPkts, ifOutMulticastPkts and ifOutBroadcastPkts.
The ensuing table for Ether-Like MIB Counters settings are informational only:
dot3StatsAlignmentErrors, dot3StatsFCSErrors, dot3StatsSingleCollisionFrames,
dot3StatsMultipleCollisionFrames, dot3StatsDeferredTransmissions,
dot3StatsLateCollisions, dot3StatsExcessiveCollisions, dot3StatsFrameTooLongs,
dot3StatsSymbolErrors, dot3ControlInUnknownOpcodes, dot3InPauseFrames and
dot3OutPauseFrames.
The ensuing table for Rmon MIB Counters settings are informational only: etherStats-
DropEvents, etherStatsOctets, etherStatsPkts, etherStatsBroadcastPkts, etherStatsMulti-
castPkts, etherStatsCRCAlignErrors, etherStatsUnderSizePkts, etherStatsOverSizePkts,
etherStatsFragments, etherStatsJabbers, etherStatsCollisions, etherStatsPkts64Octets,
etherStatsPkts65to127Octets, etherStatsPkts128to255Octets,
etherStatsPkts256to511Octets, etherStatsPkts512to1023Octets and
etherStatsPkts1024to1518Octets.
Table 4-3. Monitoring > Port Monitoring > Port Statistics
Item Description
Port Click the drop-down menu to select a port and its captured statistical
setting values.
Clear Click Clear to clear the counter selections.