Advantech EKI-7428G Series - QoS

MANAGING SWITCH
84
The ensuing table for Storm Control Port Information settings are informational only: Port,
Port State, Broadcast (Kbps), Unknown Multicast (Kbps), Unknown Unicast (Kbps) and
Action.
4.7.2 Port Security
The Port Security page allows you to configure port isolation behavior.
To access this page, click Security > Port Security.
Figure 4-57. Security > Port Security
The following table describes the items in the previous figure.
The ensuing table for Port Security Information settings are informational only: Port,
Enabled, FDB Learn Limit and Violation MAC Notification.
Table 4-55. Security > Port Security
Item Description
Port Select Enter a single or multiple port numbers to configure.
Enabled Select Enabled or Disabled to define the selected Port.
FDB Learn Limit
(0-64)
Enter the variable (0 to 64) to set the learn limit for the FDB setting.
Violation MAC
Notification
Select Enabled or Disabled to define the selected Port.
Apply Click Apply to save the values and update the screen.