Advantech ICAM-500 Series - Page 37

31 ICAM-500 Programming Guide
Chapter 4 CamNavi2 SDK API Manual
get_lighting_strobe_enable()
Get LED lighting enable state.
Returns: int
LED lighting enable state.
init value = 1
range [0..1]
See also:
lighting.Lighting.strobe_enable
Control by lighting instance.
set_lighting_strobe_enable(strobe)
Set LED lighting enable state.
Parameters: strobe
 enable = 1
 disable = 0
Returns: int
0: Success
See also:
lighting.Lighting.strobe_enable
Control by lighting instance.
get_img_brightness()
Get camera sensor brightness.
Returns: int
Sensor brightness value.
See also:
image.CImage.brightness
Control by image instance.
set_img_brightness(brightness)
Set camera sensor brightness.
Parameters: brightness
Brightness value.
init value = 100
range = [0..255]
step = 1
Returns: int
0: Success
See also:
image.CImage.brightness
Control by image instance.