Advantech ICAM-500 Series - Page 38

ICAM-500 Programming Guide 32
get_img_gain()
Get camera sensor gain value.
Returns: int
Camera sensor gain value.
See also:
image.CImage.gain
Control by image instance.
set_img_gain(gain)
Set camera sensor gain value.
Parameters: gain
Camera sensor gain value.
init value = 0
range = [0..24]
step = 1
Returns: int
0: Success
See also:
image.CImage.gain
Control by image instance.
get_img_sharpness()
Get camera image sharpness value.
Returns: int
Camera image sharpness value.
See also:
HYPERLINK \l "image.CImage.sharpness
Control by HYPERLINK \l "image instance.
set_img_sharpness(sharpness)
Set image sharpness value. Support ‘GRAY8’ and ‘YUY2’ pixel format.
Parameters: gain
Image sharpness value.
init value = 0
range = [0..100]
step = 1
Returns: int
0: Success
See also:
HYPERLINK \l "image.CImage.sharpness
Control by HYPERLINK \l "image instance.