Advantech ICAM-500 Series - Page 39

33 ICAM-500 Programming Guide
Chapter 4 CamNavi2 SDK API Manual
get_img_exposure_time()
Get camera sensor exposure time value.
Returns: int
Camera sensor exposure time. Convert equation: value * 100
(micro sec.)
See also:
image.CImage.exposure_time
Control by image instance.
set_img_exposure_time(exp_time)
Set camera sensor exposure time value.
Parameters: exp_time
Camera sensor exposure value.
init value = 50
range = [1..1000]
step = 1 Convert equation: exp_time * 100 (micro sec.)
Returns: int
new exposure time
See also:
image.CImage.exposure_time
Control by image instance.
get_img_auto_exposure()
Get camera auto exposure fuction status.
Returns: int
Camera auto exposure function status.
 1: Enabled
 0: Disabled
See also:
image.CImage.auto_exposure
Control by image instance.