Advantech ICAM-500 Series - Module Image; Class Cimage

ICAM-500 Programming Guide 40
4.4 module image
4.4.1 class CImage
class image.CImage(camera)
Camera image properties controls.
property brightness
Image brightness setting.
Getter: Read sensor brightness setting.
Setter: Set sensor brightness setting.
Value:  init value: 100
 range: [0..255]
Type: int
Raises: ValueError
Input value out of range.
property gain
Image gain setting.
Getter: Read sensor gain setting.
Setter: Set sensor gain setting.
Value:  init value: 0
 range: [0..24]
Type: int
Raises: ValueError
Input value out of range.
property saturation_op
Color image enable saturation setting.
Sku: color
Getter: Read enable saturation setting.
Setter: Enable saturation setting.
Value:  init value: 1
 range: [0,1]
Type: int
Raises: ValueError
Input value out of range.