Advantech ICAM-500 Series - Page 60

ICAM-500 Programming Guide 54
Value:  0: None
 1: rising edge
 2: falling edge
 3: both
Type: int
Raises: ValueError
Input value out of range.
property debounce_time
DI trigger signal debounce time.
Getter: Get debounce time value
Setter: Set debounce time
Value:  range: [0..65535]
 unit: Milli second.
Type: int
Raises: ValueError
Input value out of range.
property debounce_mode
Configure DI trigger signal debounce mode.
Getter: Read DI debounce mode.
Setter: Enable DI debounce mode.
Value:  0: Disable
 1: Enable
Type: int
register_event(event_handle)
Register DI trigger event handler.
Example:
def di_event():
pass
Parameters: event_handle:
Event handler function. Reference di_event example.