Advantech ICAM-520 Series - Page 3

ICAM-500/520 Startup Manual 3
Ethernet/LAN
Ethernet Connector (LAN)
ICAM-520/500 series is equipped with one Ethernet port
provides a M12 connector.
Pin Signal
1 MDI_0_P
2 MDI_0_N
3 MDI_1_P
4 MDI_1_N
5 MDI_3_P
6 MDI_3_N
7 MDI_2_N
8 MDI_2_P
Micro USB
Only for engineering mode usage
Pin Signal
1 Vbus (4.4-5.25V)
2 D-
3 D+
4 ID
5 GND
Display
HDMI
Pin Signal Pin Signal
1 TMDS data 2+ 11 TMDS clock shield
2
TMDS data 2
shield
12 TMDS clock-
3 TMDS data 2- 13 CEC
4 TMDS data 1+ 14 No connected
5
TMDS data 1
shield
15 DDC clock
Connections (Cont.)
6 TMDS data 1- 16 DDC data
7 TMDS data 0+ 17 Ground
8
TMDS data 0
shield
18 +5V power
9 TMDS data 0- 19 Hot plug detect
10 TMDS clock+
USB type C connector
Only for USB Hub connect to keyboard & mouse usage,
Connect to USB storage will increase the power consump-
tion and will heat the system. Please refer to the table below
for pin assignments.
Pin Signal Pin Signal
A1 GND B1 GND
A2 SSTXp1 B2 SSTXp1
A3 SSTXn1 B3 SSTXn1
A4 VBUS B4 VBUS
A5 CC1 B5 SBU2
A6 Dp1 B6 Dn2
A7 Dn1 B7 Dp2
A8 SBU1 B8 CC2
A9 VBUS B9 VBUS
A10 SSRXn2 B10 SSTXn2
A11 SSRXp2 B11 SSTXp2
A12 GND B12 GND
Connections (Cont.)