Advantech ICAM-520 Series Programming Guide

ICAM-500 Programming Guide 20
*** This API can be set at run-time, but need to re-open (ie. Call advcam_close(),
then advcam_open() ) to take effect
advcam_get_acq_mode(cam)
Get acquisition mode property.
Parameters: cam: ABSCamera
Camera instance
Returns: int
Acquisition mode:
 0: Free run mode
 1: Software trigger mode
 2: Hardware trigger mode
advcam_set_acq_mode(cam, acq_mode)
Set acquisition mode property.
Parameters: cam: ABSCamera
Camera instance
acq_mode : int
Acquisition mode:
 0: Free run mode
 1: Software trigger mode
 2: Hardware trigger mode
advcam_get_focus_distance(cam)
Get lens focusing motor distance.
Parameters: cam: ABSCamera
Camera instance.
Returns: int
Lens focusing motor distance.
See also:
iCam500.iCam500.get_focus_distance()
advcam_set_focus_distance(cam, distance)
Set lens focusing motor distance.
Parameters: cam: ABSCamera
Camera instance.
distance: int
Lens focusing motor distance.
init value = 0
range = [0..1600]
default step = 30
See also:
iCam500.iCam500.set_focus_distance()

Advantech ICAM-520 Series Specifications

General

Brand	Advantech
Model	ICAM-520 Series
Category	Digital Camera
Language	English