Advantech ICAM-520 Series Programming Guide

27 ICAM-500 Programming Guide
Chapter 4 CamNavi2 SDK API Manual
snap_image(timeout=60 s)
Snap an image.
Parameters: timeout: int
Wait image time.
Returns: []
Image data in JPEG format.
software_trigger()
Invoke software trigger command.
property hw_trigger_delay
Hardware trigger delay time setting.
Sku: color
Getter: Read hardware trigger delay time value.
Setter: Set hardware trigger delay time value.
Value:  init value: 0
 range: [0..65535]
 unit: us (microsecond)
Type: int
Raises: ValueError
Input value out of range.
property hw_trigger_exp_src
Set hardware trigger exposure source.
Sku: color
Getter: Read hardware trigger exposure source.
Setter: Set hardware trigger exposure source.
Value:  init value: 0
 range: [0,1]
 0: Exposure time from F/W
 1: Exposure time from hardware trigger puls
Type: int
Raises: ValueError
Input value out of range.

Advantech ICAM-520 Series Specifications

General

Brand	Advantech
Model	ICAM-520 Series
Category	Digital Camera
Language	English