Advantech ICR-1601 - Create; Edit OSPF Area Rules

ICR-1601
105
Create / Edit OSPF Area Rules
The router allows you to custom your OSPF Area List rules. It supports up to a maximum of 32 rule
sets.
When Add button is applied, OSPF Area Rule Configuration screen will appear.
OSPF Area Configuration
Item
Value setting
Description
Area Subnet
1. Classless Inter Domain
Routing (CIDR) Subnet
Mask Notation. (Ex:
192.168.1.0/24)
2. A Must filled setting
The Area Subnet of this router on OSPF Area List.
Area ID
1. IPv4 Format
2. A Must filled setting
The Area ID of this router on OSPF Area List.
Area
The box is unchecked by
default.
Click Enable box to activate this rule.
Save
N/A
Click the Save button to save the configuration