Advantech ICR-1601 - Page 110

ICR-1601
110
Redirect Rule Configuration
Item
Value setting
Description
Domain Name
1. String format can be
any text
2. A Must filled setting
Enter a domain name to be redirect. The traffic to specified domain name will
be redirect to the following IP address.
Value Range: at least 1 character is required; ‘*’ for any.
IP
1. IPv4 format
2. A Must filled setting
Enter an IP Address as the target for the DNS redirect.
Condition
1. A Must filled setting
2. Always is selected by
default.
Specify when the DNS redirect action can be applied.
It can be Always, or WAN Block.
Always: The DNS redirect function can be applied to the matched DNS all the
time.
WAN Block: The DNS redirect function can be applied to the matched DNS
only when the WAN connection is disconnected, or un-reachable.
Description
1. String format can be
any text
2. A Must filled setting
Enter a brief description for this rule.
Value Range: 0 ~ 63 characters.
Enable
The box is unchecked by
default
Click the Enable button to activate this rule.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings