Advantech ICR-1601 - Page 114

ICR-1601
114
External Server Configuration
Item
Value setting
Description
Sever Name
1. String format can be
any text
2. A Must filled setting
Enter a server name. Enter a name that is easy for you to understand.
Server Type
A Must filled setting
Specify the Server Type of the external server, and enter the required
settings for the accessing the server.
Email Server (A Must filled setting) :
When Email Server is selected, User Name, and Password are also required.
User Name (String format: any text)
Password (String format: any text)
Syslog Server
RADIUS Server (A Must filled setting) :
When RADIUS Server is selected, the following settings are also required.
Primary :
Shared Key (String format: any text)
Authentication Protocol (By default CHAP is selected)
Session Timeout (By default 1)
The values must be between 1 and 60.
Idle Timeout: (By default 1)
The values must be between 1 and 15.
Secondary :
Shared Key (String format: any text)
Authentication Protocol (By default CHAP is selected)
Session Timeout (By default 1)
The values must be between 1 and 60.
Idle Timeout: (By default 1)
The values must be between 1 and 15.
Server IP/FQDN
A Must filled setting
Specify the IP address or FQDN used for the external server.
Server Port
A Must filled setting
Specify the Port used for the external server. If you selected a certain server
type, the default server port number will be set.
For Email Server 25 will be set by default;
For Syslog Server, port 514 will be set by default;
For RADIUS Server, port 1812 will be set by default;
Value Range: 1 ~ 65535.
Account Port
1. A Must filled setting
2. 1813 is set by default
Specify the accounting port used if you selected external RADIUS server.
Value Range: 1 ~ 65535.
Server
The box is checked by
default
Click Enable to activate this External Server.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings
Refresh
N/A
Click the Refresh button to refresh the external server list.