Advantech ICR-1601 - Ipsec Setting; Enable Ipsec; Create;Edit Ipsec Tunnel

ICR-1601
130
IPSec Setting
Go to Security > VPN > IPSec tab.
The IPSec Setting allows user to create and configure IPSec tunnels.
Enable IPSec
Configuration Window
Item
Value setting
Description
IPsec
Unchecked by
default
Click the Enable box to enable IPSec function.
NetBIOS over
IPSec
Unchecked by
default
Click the Enable box to enable NetBIOS over IPSec function.
NAT Traversal
Checked by default
Click the Enable box to enable NAT Traversal function.
Max. Concurrent
IPSec Tunnels
Depends on Product
specification.
The specified value will limit the maximum number of simultaneous IPSec
tunnel connection. The default value can be different for the purchased model.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings
Create/Edit IPSec tunnel
Ensure that the IPSec enable box is checked to enable before further configuring the IPSec tunnel settings.
When Add/Edit button is applied, a series of configuration screens will appear. They are Tunnel
Configuration, Local & Remote Configuration, Authentication, IKE Phase, IKE Proposal Definition, IPSec
Phase, and IPSec Proposal Definition. You have to configure the tunnel details for both local and remote
VPN devices.