Advantech ICR-1601 - IKE Phase Window

ICR-1601
134
IKE Phase Window
Item
Value setting
Description
IKE Version
1. A must fill setting
2. v1 is selected by
default
Specify the IKE version for this IPSec tunnel. Select v1 or v2
Note: IKE versions will not be available when AH option in Encapsulation
Protocol is selected.
Negotiation Mode
Main Mode is set by
default
Specify the Negotiation Mode for this IPSec tunnel. Select Main Mode or
Aggressive Mode.
X-Auth
None is selected by
default
Specify the X-Auth role for this IPSec tunnel. Select Server, Client, or None.
Selected None no X-Auth authentication is required.
Selected Server this gateway will be an X-Auth server. Click on the X-Auth
Account button to create remote X-Auth client account.
Selected Client this gateway will be an X-Auth client. Enter User name and
Password to be authenticated by the X-Auth server gateway.
Dead Peer
Detection (DPD)
1. Checked by
default
2. Default Timeout
180s and Delay 30s
Click Enable box to enable DPD function. Specify the Timeout and Delay time
in seconds.
Value Range: 0 ~ 999 seconds for Timeout and Delay.
Phase1 Key Life
Time
1. A Must fill setting
2. Default 3600s
3. Max. 86400s
Specify the Phase1 Key Life Time.
Value Range: 30 ~ 86400.