Advantech ICR-1601 - Authentication Window

ICR-1601
137
Authentication Window
Item
Value setting
Description
Key Management
A Must fill setting
Select Key Management from the dropdown box for this IPSec tunnel.
In this section Manually is the option selected.
Local ID
An optional setting
Specify the Local ID for this IPSec tunnel to authenticate.
Select the Key ID for Local ID and enter the Key ID (English alphabet or
number).
Remote ID
An optional setting
Specify the Remote ID for this IPSec tunnel to authenticate.
Select Key ID for Remote ID and enter the Key ID (English alphabet or
number).
Local & Remote Configuration Window
Item
Value setting
Description
Local Subnet
A Must fill setting
Specify the Local Subnet IP address and Subnet Mask.
Local Netmask
A Must fill setting
Specify the Local Subnet Mask.
Remote Subnet
A Must fill setting
Specify the Remote Subnet IP address
Remote Netmask
A Must fill setting
Specify the Remote Subnet Mask.
Remote Gateway
1. A Must fill setting
2. An IPv4 address or
FQDN format
Specify the Remote Gateway. The Remote Gateway
Under the Manually Key Management authentication configuration, only one subnet is supported for
both Local and Remote IPSec peer.