Advantech ICR-1601 - Create;Edit Packet Filter Rules

ICR-1601
163
Create/Edit Packet Filter Rules
The router allows you to customize your packet filtering rules. It supports up to a maximum of 20 filter
rule sets.
When Add button is applied, Packet Filter Rule Configuration screen will appear.
Packet Filter Rule Configuration
Item Name
Value setting
Description
Rule Name
1. String format can be
any text
2. A Must filled setting
Enter a packet filter rule name. Enter a name that is easy for you to
remember.
Value Range: 1 ~ 30 characters.
From Interface
1. A Must filled setting
2. By default Any is
selected
Define the selected interface to be the packet-entering interface of the
router. If the packets to be filtered are coming from LAN to WAN then select
LAN for this field. Or VLAN-1 to WAN then select VLAN-1 for this field. Other
examples are VLAN-1 to VLAN-2. VLAN-1 to WAN.
Select Any to filter packets coming into the router from any interfaces.
Please note that two identical interfaces are not accepted by the router. e.g.,
VLAN-1 to VLAN-1.