Advantech ICR-1601 - URL Blocking Setting; Enable URL Blocking

ICR-1601
167
URL Blocking Setting
Go to Security > Firewall > URL Blocking Tab.
In "URL Blocking" page, there are three configuration windows. They are the "Configuration" window,
"URL Blocking Rule List" window, and "URL Blocking Rule Configuration" window.
The "Configuration" window can let you activate the URL blocking function and specify to black listing
or to white listing the packets defined in the "URL Blocking Rule List" entry. In addition, log alerting can be
enabled to record on-going events for any disallowed Web request packets. Refer to "System Status" in
"6.1.1 System Related" section in this user manual for how to view recorded log.
The "URL Blocking Rule List" window lists all your defined URL blocking rule entry. And finally, the "URL
Blocking Rule Configuration" window can let you define URL blocking rules. The parameters in a rule include
the rule name, the Source IP or MAC, the URL/Domain Name/Keyword, the destination service ports, the
integrated time schedule rule and the rule activation.
Enable URL Blocking
Configuration
Item
Value setting
Description
URL Blocking
The box is unchecked
by default
Check the Enable box to activate URL Blocking function.
Black List /
White List
Deny those match the
following rules is set by
default
Specify the URL Blocking Policy, either Black List or White List.
Black List: When Deny those match the following rules is selected, as the name
suggest, the matched Web request packets will be blocked.
White List: When Allow those match the following rules is selected, the
matched Web request packets can pass through the Gateway, and the others
that don’t match the rules will be blocked.
Log Alert
The box is unchecked
by default
Check the Enable box to activate Event Log.
Save
NA
Click Save button to save the settings
Undo
NA
Click Undo button to cancel the settings