ICR-1601
169
This field is to specify the Destination Port number.
Select Any to filter packets going to any Port.
Select Specific Service Port to filter packets going to a specific Port
entered in this field.
Select Port Range to filter packets going to a specific range of Ports
entered in this field.
Apply a specific Time Schedule to this rule; otherwise leave it as (0) Always.
If the dropdown list is empty ensure Time Schedule is pre-configured. Refer
to Object Definition > Scheduling > Configuration tab.
The box is unchecked by
default.
Click the Enable box to activate this rule.
Click the Save button to save the settings.
Click the Undo button to cancel the changes.
Click the Back button to return to the URL Blocking Configuration page.
4.2.3 MAC Control
"MAC Control" function allows you to assign the accessibility to the gateway for different users based
on device’s MAC address. When the administrator wants to reject the traffics from some client hosts with
specific MAC addresses, he can use the "MAC Control" function to reject with the black list configuration.