ICR-1601
177
Firewall Options Setting
Go to Security > Firewall > Options Tab.
The firewall options setting allows network administrator to modify the behavior of the firewall and
to enable Remote Router Access Control.
Enable Firewall Options
The box is unchecked by default
Check the Enable box to activate the Stealth Mode function
The box is checked by default
Check the Enable box to activate the SPI function
The box is unchecked by default
Check the Enable box to activate the Discard Ping from WAN function
Define Remote Administrator Host
The router allows network administrator to manage router remotely. The network administrator can
assign specific IP address and service port to allow accessing the router.