Advantech ICR-1601 - Page 187

ICR-1601
187
TR-069
Item
Value setting
Description
TR-069
The box is unchecked
by default
Check the Enable box to activate TR-069 function.
Interface
WAN-1 is selected by
default.
When you finish set basic network WAN-1 ~ WAN-n, you can choose WAN-
1 ~ WAN-n
When you finish set Security > VPN > IPSec/OpenVPN/PPTP/L2TP/GRE, you
can choose IPSec/OpenVPN/PPTP/L2TP/GRE tunnel, the interface just like
“IPSec #1”
Data Model
ACS Cloud Data Model
is selected by default.
Select the TR-069 data model for the remote management.
Standard: the ACS Server is a standard one, which is fully comply with TR-
069.
ACS Cloud Data Model: Select this data model if you intend to use Cloud
ACS Server to managing the deployed routers.
ACS URL
A Must filled setting
You can ask ACS manager provide ACS URL and manually set
ACS Username
A Must filled setting
You can ask ACS manager provide ACS username and manually set
ACS Password
A Must filled setting
You can ask ACS manager provide ACS password and manually set
ConnectionRequest
Port
1. A Must filled
setting.
2. By default 8099 is
set.
You can ask ACS manager provide ACS ConnectionRequest Port and
manually set
Value Range: 0 ~ 65535.
ConnectionRequest
UserName
A Must filled setting
You can ask ACS manager provide ACS ConnectionRequest Username and
manually set
ConnectionRequest
Password
A Must filled setting
You can ask ACS manager provide ACS ConnectionRequest Password and
manually set
Inform
1. The box is checked
by default.
2. The Interval value is
300 by default.
When the Enable box is checked, the router (CPE) will periodically send
inform message to ACS Server according to the Interval setting.
Value Range: 0 ~ 86400 for Inform Interval.
Certification Setup
The default box is
selected by default
You can leave it as default or select an expected certificate and key from
the drop down list.
Refer to Object Definition > Certificate Section for the Certificate
configuration.
Save
N/A
Click Save to save the settings.
Undo
N/A
Click Undo to cancel the modifications.
When you finish set ACS URL ACS Username ACS Password, your router (CPE, Client Premium
Equipment) can send inform to ACS Server.
When you finish set ConnectionRequest Port ConnectionRequest Username ConnectionRequest
Password, ACS Server can ask the gateway (CPE) to send inform to ACS Server.