Advantech ICR-1601 - Create;Edit Trap Event Receiver

ICR-1601
195
OID Filter Prefix
1. The default value
is 1
2. A Must filled
setting
3. String format: any
legal OID
The OID Filter Prefix restricts access for this version 3 user to the sub-tree
rooted at the given OID.
Value Range: 1 ~2080768.
Enable
1.The box is checked
by default
Click Enable to enable this version 3 user.
Save
N/A
Click the Save button to save the configuration. But it does not apply to
SNMP functions. When you return to the SNMP main page. It will show “Click
on save button to apply your changes” remind user to click main page Save
button.
Undo
N/A
Click the Undo button to cancel the settings
Back
N/A
Click the Back button to return the last page.
Create/Edit Trap Event Receiver
The SNMP allows you to custom your trap event receiver. The router supports up to a maximum of
4 Trap Event Receiver sets.
When Add button is applied, Trap Event Receiver Rule Configuration screen will appear. The default
SNMP Version is v1. The configuration screen will provide the version 1 must filled items.
When you selected v2c, the configuration screen is exactly the same as that of v1, except the version.
When you selected v3, the configuration screen will provide more setting items for the version 3 Trap.