Advantech ICR-1601 - Page 202

ICR-1601
202
Configuration
Item
Value setting
Description
Telnet
1. The LAN Enable box
is checked by
default.
2. By default Service
Port is 23.
Check the Enable box to activate the Telnet function for connecting from LAN or WAN
interfaces.
You can set which number of Service Port you want to provide for the
corresponding service.
Value Range: 1 ~65535.
SSH
3. The LAN Enable box
is checked by
default.
4. By default Service
Port is 22.
Check the Enable box to activate the SSH Telnet function for connecting from LAN or
WAN interfaces.
You can set which number of Service Port you want to provide for the
corresponding service.
Value Range: 1 ~65535.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings
Configuration
Item
Value setting
Description
root
1. String: any text but
no blank character
2. The default password
for telnet is
‘wirelessm2m’.
Type old password and specify new password to change root password.
Note_1: You are highly recommended to change the default telnet
password with yours before the device is deployed.
Note_2: If you have trouble for the default password for previous FW
version, please check the corresponding User Manual to get the correct one.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings