ICR-1601
208
Click the Active button to synchronize time immediately.
Click the Save button to save the settings.
Click the Refresh button to update the system time immediately.
Instead of manually configuring the system time for the router, there are two simple and quick
solutions for you to set the correct time information and set it as the system time for the router.
The first one is “Sync with Timer Server”. Based on your selection of time zone and time server in above
time information configuration window, system will communicate with time server by NTP Protocol to get
system date and time after you click on the Sync with Timer Server button.
Note: Remember to select a correct time zone for the device, otherwise, you will just get the UTC
(Coordinated Universal Time) time, not the local time for the device.
The second one is “Sync with my PC”. Click on the Sync with my PC button to let system synchronize
its date and time to the time of the administration PC.
5.2.4 System Log
System Log screen contains various event log tools facilitating network administrator to perform local
event logging and remote reporting.
Go to Administration > System Operation > System Log tab.
To Next Page
Loading...
