ICR-1601
214
HTTP(S) / FTP(S) Server configuration:
To make Auto Upgrade working, both the Firmware and Config file need to have a .ver file stored in
the same folder on HTTP(S) / FTP(S) server. The updates are triggered by the content of the .ver files (newer
date).
For the firmware, the .ver file will comes with the general release. Upload both Firmware
files .bin and .ver in the same folder.
For the configuration file, .ver file example can be generated by the config .ver example
button in the Enable row in the router Auto Upgrade configuration. Both config.bin and .ver
files has to be uploaded in the same folder. The name of .ver file and config.bin has to be the
same. It can be the chosen Unit ID or MAC (note that when the parameter Unit ID is filled, the
configuration filename is defined, and the hardware MAC address name will not be used). Edit
the time on .ver file for configuration to make sure the configuration will be updated.
Example of the Firmware and Configuration files on the HTTP(S) / FTP(S) server:
Example of the configuration .ver file content (date including hours in format YYYYMMDDHH):
To Next Page
Loading...
